Sharp PG-F317X - Notevision XGA DLP Projector Manuale di configurazione - Pagina 15

Sfoglia online o scarica il pdf Manuale di configurazione per Proiettore Sharp PG-F317X - Notevision XGA DLP Projector. Sharp PG-F317X - Notevision XGA DLP Projector 34. Xga conference/classroom data-video projectors
Anche per Sharp PG-F317X - Notevision XGA DLP Projector: Opuscolo e specifiche (4 pagine)

Stampa la pagina

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in "Address"

on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup

screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment

before starting the operation. (See pages 21-

25 of the projector's operation manual.)

Complete the AC cord connection. (See page

25 of the projector's operation manual.)

Note

• When connecting the projector to the LAN,

use a commercially available LAN cable

(UTP cable, Category 5, cross-over type).

When connecting the projector to a hub, use

a straight-through cable.

Start Internet Explorer (version

5.0 or later) on the computer.

Enter "http://" followed by the

projector IP address set by the

procedure on page

by "/" in "Address", and then

press the "Enter" key.

• When "DHCP Client" is set to "OFF" on

the projector, IP address is

192.168.150.2. If you did not change the

IP address in "3. Setting up a Network

Connection for the Projector" (pages

13-14), enter "http://192.168.150.2/".

A screen for controlling the pro-

jector appears, ready for per-

forming various status condi-

tions, control, and settings.

followed

-15