Crestron 4K DigitalMedia 3-Series Dal manuale - Pagina 2

Sfoglia online o scarica il pdf Dal manuale per Controllore Crestron 4K DigitalMedia 3-Series. Crestron 4K DigitalMedia 3-Series 2. Media presentation controller
Anche per Crestron 4K DigitalMedia 3-Series: Manuale supplementare (20 pagine), Manuale di avvio rapido (2 pagine), Dal manuale (2 pagine), Manuale di avvio rapido (7 pagine), Avvio rapido (2 pagine), Manuale di avvio rapido (8 pagine), Dal manuale (2 pagine)

Stampa la pagina

Crestron 4K DigitalMedia 3-Series Dal manuale

A sample application diagram follows.

Laptop

TT-100

Computer

Laptop

As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.

This product is Listed to applicable UL

Standards and requirements tested by Underwriters Laboratories Inc.

Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters Laboratories Inc.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement

CAN ICES-3(B)/NMB-3(B)

GUIDE

Projection

screen

SET

AUD

RGB

HDM

HID

USB

1 -

E R

X -

2 0

C E

N T

D M

- T

E R

M P

U T

D M

C O

Microphone

LAN

RES

VDC

PWR

0.75

I OUT

HDM

DM-TX-201-C

OUT

LAN

Amplifier

TT-100

Monitor

TT-100

Stereo

speakers

DM-RMC-4K-100-C

RES

0-C

I OUT

-10

SET

HDM

-R

GND

COM

0.75

A MAX

RTS

CTS

LAN

Projector

Determine the Address of the Device

The device can be addressed using the hostname. The default hostname

is DMPS3-xxxxxxxx, where xxxxxxxx consists of the last eight characters

(excluding punctuation) of the MAC address. For example, if the MAC

address is 00:10:7F:08:09:AA:05, the default hostname is

DMPS3-0809AA05. The MAC address is labeled on the shipping box and

rear panel of the device.

Alternatively, the device can be addressed using the IP address. By default,

DHCP is enabled. To set a static IP address, use the Crestron Toolbox™

application on a PC that connects to the DMPS3-4K-150-C via the Ethernet

network or a USB connection to the COMPUTER port on the front panel of

the device. If the PC connects to the Ethernet network, the Device Discovery

Tool in the Crestron Toolbox application can be used to find the current IP

address.

Commission the System

Using the web interface, configure the device. To access the web interface,

open a web browser and go to the setup directory of the device by entering

either of the following:

hostname/setup (hostname is the hostname of the device)

xxx.xxx.xxx.xxx/setup (xxx.xxx.xxx.xxx is the IP address of the device)

The device also provides the built-in .AV Framework™ program, which

enables complete system control without requiring additional programming.

To access the .AV Framework configuration interface, open a web browser

and then go to either of the following:

hostname/avf/index.html (hostname is the hostname of the device)

xxx.xxx.xxx.xxx/avf/index.html (xxx.xxx.xxx.xxx is the IP address of the

device)

For more information, go to www.crestron.com/avframework.

Connect to the Cloud

The XiO Cloud

service allows supported Crestron

devices across an

enterprise to be managed and configured from one central and secure

location in the cloud. Supported devices are preconfigured to connect to

the service out of the box.

Use of the service requires a registered XiO Cloud account. To register for

an XiO Cloud account, refer to

www.crestron.com/Support/Tools/Licensing-

Registration/XiO-Cloud-Registration-Room-Licenses.

To connect the device to the XiO Cloud service, do the following:

Record the MAC address and serial number that are labeled on

the shipping box or rear panel of the device. The MAC address

and serial number are required in order to add the device to the

XiO Cloud service.

Rack Mounting Safety Precautions

•

Elevated Operating Ambient Temperature: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, consideration should be

given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

•

Reduced Airflow: Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.

•

Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

•

Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing this concern.

•

Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips).

Electrical Connection

"This product must be connected to an earthed mains socket-outlet."

•

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan."

•

Norway: "Apparatet må tilkoples jordet stikkontakt."

•

Sweden: "Apparaten skall anslutas till jordat uttag."

The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/legal/open-source-software.

Crestron, the Crestron logo, 3-Series, .AV Framework, Cresnet, Crestron Toolbox, DigitalMedia, DM 8G+, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks

or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. UL and the UL logo are either trademarks or registered trademarks

of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks

and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Claim the device to the XiO Cloud service as described in the

XiO Cloud User

Guide.

Select the device from the cloud interface to view its status and settings.

The device may now also be managed and assigned to a group or room.

For more information, refer to the

XiO Cloud User

Guide.

NOTE:

For XiO Cloud accounts with room-based licenses, the device must

be added to a licensed room before its status and settings can be viewed.

Allow Automatic Switching or

Manually Select an Input

By default, automatic switching of inputs is enabled. Automatic switching

causes the last connected input to be routed to the output. The AUTO LED

lights to indicate that automatic switching is enabled.

To manually select and activate the desired input, press one of the VGA

(1–4), HDMI (1–4), or DM (1–2) INPUT SELECT buttons. Refer to the

following table for a summary of the LED behavior of selected and

nonselected inputs.

COLOR

DESCRIPTION

The input is the active selection, and an incoming signal

Solid green

is detected.

The input is the active selection, but an incoming signal

Flashing green

is not detected.

The input is not the active selection, but an incoming

Solid amber

signal is detected.

The input is not the active selection, and an incoming

Off

signal is not detected.

NOTE:

Manual selection of an input disables automatic switching.

When automatic switching is disabled, the AUTO LED turns off.

*The DM IN and DM OUT ports are PoDM and HDBaseT PoE (Power over Ethernet) PSE

(Power Sourcing Equipment) ports. Any wiring that is connected to a PoDM or HDBaseT

PoE PSE port is for intrabuilding use only and should not be connected to a line that runs

outside of the building in which the PSE is located.

Learn More

Visit the website for additional information and the latest

firmware updates. To learn more about this product, use

a QR reader application on your mobile device to scan

the QR images.

Crestron Electronics

15 Volvo Drive, Rockleigh, NJ 07647

888.CRESTRON | www.crestron.com

The product warranty can be found at www.crestron.com/legal/sales-terms-conditions-warranties.

DOC. 7654H (2042246) 05.22

Specifications subject to change without notice.