Shimano BL-T8000 Manuale del rivenditore - Pagina 37

Sfoglia online o scarica il pdf Manuale del rivenditore per Accessori per biciclette Shimano BL-T8000. Shimano BL-T8000 39. Hydraulic disc brake

MAINTENANCE

Replacing the brake pads

BR-M8000

(A)

(C)

BR-M6000

Depress the brake lever several times to check that the operation becomes stiff.

Remove the pad spacer, install the wheel, and then check that there is no interference

between the disc brake rotor and caliper.

If they are touching, adjust while referring to "Installation of the calipers and securing the

hose".

Install the new brake pads, the bolt, the

split pin, and the pad spacer (red).

For BR-M8000, at this point, make sure

to install the snap ring as well.

For BR-M6000, after this, bend open the

split pin.

(B)

(D)

(A)

(E)

(D)

(A)

Brake pad

(B)

Snap ring

(C)

Bolt

(D)

Pad spacer (red)

(E)

Split pin

Tightening torque

2 - 4 N·m

TECH TIPS

Install the pad fixing spring as shown in the

illustration. (There are left (L) and right (R)

marks on the spring.)

Pad fixing spring