Shimano BR-M6000 Manuale del rivenditore - Pagina 28
Sfoglia online o scarica il pdf Manuale del rivenditore per Accessori per biciclette Shimano BR-M6000. Shimano BR-M6000 39. Hydraulic disc brake
Anche per Shimano BR-M6000: Manuale del rivenditore (39 pagine)
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
If the brake lever is then operated, air bubbles in the system will rise up through the port
into the oil funnel.
Once the bubbles stop appearing, depress the brake lever as far as it will go.
It is normal for the lever to be stiff at this point.
11
Lever operation
12
To be continued on next page
(x)
Set the lever unit to the horizontal
position as shown in the illustration and
[1]
tilt it in the direction of [1] by 30°, and
(z)
then carry out step 9 to check that there
is no air remaining.
(z)
Next, tilt the lever unit 30° in the
[2]
direction of [2], and carry out step 9
again to check that there is no air
remaining.
If any air bubbles appear, repeat the
above procedure until they stop
appearing.
(z)
(y)
30°
28
(x)
Loose
(y)
Slightly stiff
(z)
Stiff
NOTE
If the lever does not become stiff, repeat the
procedures from step 5.
(z)