Crestron 4K DigitalMedia 3-Series Manuale supplementare - Pagina 12

Sfoglia online o scarica il pdf Manuale supplementare per Sistemi di controllo Crestron 4K DigitalMedia 3-Series. Crestron 4K DigitalMedia 3-Series 20. Media presentation controller
Anche per Crestron 4K DigitalMedia 3-Series: Manuale di avvio rapido (2 pagine), Dal manuale (2 pagine), Manuale di avvio rapido (7 pagine), Avvio rapido (2 pagine), Manuale di avvio rapido (8 pagine), Dal manuale (2 pagine), Dal manuale (2 pagine)

Standby Timeout

Standby timeout sets the period of time after which the output will shut down if no video is

detected on the input.

To configure Standby Timeout settings, use the web interface or SIMPL Windows as

discussed in the following sections.

An overview of the steps necessary to configure the Standby Timeout setting is as follows:

NOTE:

1. On the Main Setup page, click the INTERNAL SCALER Settings button.

Using SIMPL Windows, set the standby timeout in subslot 02 of the Outputs slot for the

DMPS3-4K-150-C. To do so, set the <Scaler_Out_Standby_Timeout> analog input join to

the desired value.

NOTE:

8 • DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System

For detailed information, refer to the online help of the web interface.

The Output Configuration page for the internal scaler opens.

Adjust the Timeout slider to the desired value.

Output Configuration Page for Internal Scaler—Timeout Configuration

For detailed information, refer to the SIMPL Windows help file.

Supplemental Guide – DOC. 7724A