Accutone MultiPoint BT703 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Accutone MultiPoint BT703. Accutone MultiPoint BT703 5. Multipoint bluetooth headset

Operations

Pairing the Headset

If the mobile isn't able to pair the headset within 90 seconds after entering

Discovery Mode, the process will terminate automatically. User must

repeat the entire pairing process again by turning the headset OFF, and

then re-entering the Discovery Mode.

Multipoint Pairing

(Connecting your headset to 2 mobile phones)

BT703 has the ability to pair with more than one device at the same time.

1. Follow the instruction on the previous page on pairing with the first

mobile phone.

2. After the successful pairing with the first mobile phone.

3. Turn the headset off.

4. Repeat the same pairing procedure with a second mobile phone.

5. Go back to the first mobile phone, and select BTK703 to activate the

connection.

Now, both mobile phones are connected to the same Bluetooth headset.

When a call comes in from any of the two mobile phones, click the Answer

Button on the headset to connect the call.

While you are on the call with one phone, the other phone's Bluetooth

Headset connection will be disconnected temporarily. So if another call

comes in at the same time, you can only connect to the first call.

Wearing the Headset

Earbud

First, connect the headset to the Earhook as illustrated above.

Depending on which ear you prefer to wear the headset, you can flip

the Earhook over before you connect it to the headset.

Wear the headset by inserting the Earbud into your ear, and extend the

Earhook to the back of your ear for a firm fit. If the size or the curve of the

Earhook is not a perfect fit, gently bend the Earhook to adjust. Do not

use extreme force as this can break the Earhook.

If your BT703 is properly connected to your mobile phone, make a

phone call simply by dialing the number using your phone and click

send or call. The BT703 will automatically connect the audio channel.

User should be able to ear the dial-tone of the phone once the call is

being made.

Operations

Earhook