Crestron CP4N Avvio rapido

Sfoglia online o scarica il pdf Avvio rapido per Sistemi di controllo Crestron CP4N. Crestron CP4N 5.
Anche per Crestron CP4N: Avvio rapido (5 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine)

CP4 and CP4N

4-Series™ Control System

The Crestron®

CP4

and

CP4N

are secure, high-performance control

processors with a powerful 4-Series™ control engine. The CP4 and

CP4N are designed to integrate and automate technology within any

modern networked home, commercial building, or government facility.

An isolated control subnet port provides a Gigabit Ethernet

LAN dedicated to Crestron devices (CP4N Only).

NOTE: The CP4 and CP4N are functionally similar. For simplicity within

this guide, the term "control system" is used to refer to both the CP4

and CP4N unless otherwise noted.

In the Box

CP4 or CP4N, 4-Series Control System

Additional Items

Bracket, Rack Ear (2032122)

Foot, Rubber (2002389)

Connector, 3-Pin (2003575)

Connector, 4-Pin (2003576)

Connector, 5-Pin (2003577)

Connector, 8-Pin (2003580)

Connector, 9-Pin (2003581)

Power Cord, 5 ft, 10 in. (1.78 m) (2042043)

Power Pack, 24 VDC, 100–240 VAC (2045873)

Install the Control System

The control system may be mounted into a rack or placed onto a flat

surface.

Rack Mounting

The control system occupies 1U of rack space.

1. Use a #1 Phillips screwdriver to remove the six required screws from

the control system assembly (shown in the illustration below).

2. Attach the two included rack ears with the removed screws.

3. Mount the control system into the rack with four mounting screws

(not included).

Surface Placement

1. Attach the four adhesive rubber feet near the corners on the

underside of the control system.

2. Place onto a flat surface or stack with other equipment.

Quick Start