Digital Barriers EDGEVIS HD-IP250 Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per DVR Digital Barriers EDGEVIS HD-IP250. Digital Barriers EDGEVIS HD-IP250 14.

EDGEVIS HD-IP250 HARDWARE INSTALLATION

SAFETY NOTES

The EdgeVis Encoder has been designed for use in indoor environments. It can operate in temperatures from -20˚C to

+60˚C whilst powered from 12V DC.

All deployments of an HD-IP250 encoder unit should ensure that the device is not mounted:

•

Within explosive zones

•

Within 0.5m of a powered transmitter and/or receiver antenna

•

Within the engine bay/compartment of a vehicle

•

Within 1m of a vehicle fuel fill point (direct line of sight)

WARNING: The HD-IP250 Encoder has been designed to operate from a 12V DC supply. Do not connect it directly

to mains power outlet. Use the AC/DC adapter supplied with the unit.

The following precautions must be taken to avoid damage to the unit:

•

DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY

•

Always ensure the supply is within the specified voltage range and employ

suitable filtering if voltage spikes are likely

•

Do not reverse the polarity of the DC power supply. It will cause irreparable

damage to the HD-IP250

•

Always provide a common ground between the HD-IP250 unit and all

connected equipment

WARNING: Failure to observe these precautions will invalidate the warranty.

The unit is cooled by a fan. To prevent damage to the unit by overheating take the

following precautions when the unit is subject to high ambient temperatures:

•

Ensure the circular fan inlet is not blocked.

•

Ensure the exhaust slots are not blocked.

ISSUED: 10 NOVEMBER 2020

PAGE 3