Digital Check TellerScan 230 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Scanner Digital Check TellerScan 230. Digital Check TellerScan 230 19. Countertop check scanners

TellerScan 215 & 230 User Manual Rev 050609

Step

Action

Insert a new TellerScan® cleaning card in the

entry pocket (single feed or auto-feeder)

Open the imaging application and initiate

feeding while holding the card firmly to prevent

the card from actually feeding through the

scanner. You will want to cancel the

transaction after running several scan cycles.

Note: You may use the remote deposit

application to run the scanner during the

cleaning cycle, or the Scanlite demo program

available from the Digital Check web site.

Important:

Run a scan cycle and hold onto the card, but

allow it to move into the path so that the

second set of rollers is scrubbing on the

cleaning card.

Flip the card over and run the same procedure

again. This ensures that the main entry drive

roller and the double feed rollers are being

properly cleaned.

Tip:

Getting the rollers to scrub on the cleaning

cards is the most important part of the cleaning

procedure. Rollers with a severe build up of ink

and dirt will require use of the swabs to be

used to manually scrub all four of the main

drive rollers.

Cleaning Steps (continued)

Step

Action

Flip the card top to bottom and scan the card

again, this time letting it move through the

scanner into the exit pocket.

Turn the card around and repeat the same

process of scanning the card several times on

the reverse side.

Result: The TellerScan cleaning card should

have been run through the scanner three to

four times, periodically flipping the card or

swapping it end for end.

After completing the cleaning process, cancel

the transaction and discard the used

TellerScan card.