DIGITAL DELAY 1014-SCR Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Automobile Accessories DIGITAL DELAY 1014-SCR. DIGITAL DELAY 1014-SCR 11.

To set a new Dial-In time into either Your Time or Their Time press the C key until the Dial-In

times are being displayed. To enter a new number press the corresponding letter key (A or B) to the

display containing the Dial-In time to be changed. The selected display will go blank indicating the unit

is ready to accept the new Dial-In time. Enter the new Dial-In time using the numerical keys, leading

zeros do not have to be entered. For example if 9.90 for a Dial-In time is desired 990 would be entered on

the key pad. As the numbers are entered they are shown on the display, indicating the numbers are

accepted and entered into memory. If a mistake is made while entering the number, depressing the

corresponding letter key (A or B) for the display again will erase the last digit entered. This can be

repeated as many times as necessary until the display is blank.

To set a new delay time into either Delay 1 or 2 press the C key until the delay times are

displayed. Then follow the same procedure for entering a new number as instructed in setting new Dial-

In times.

To set a new stage time into any of the stages press the E key until the stage time to be changed is

displayed. Then follow the same procedure for entering a new number as instructed in setting new Dial-

In times.

To set the Throttle Mode press the D key until the Throttle Mode is shown on Display B. Display

B will show a "0101" or " 1010", to switch to the opposite setting press the B key once. A "0" means

zero Volts out and a "1" means 12 Volts out. In racing terms this is also referred to as "0" normally open,

"1" normally closed. ("0101" means off/on/off/on)

Setting Dial-In Times

Setting Delay Times

Setting Stage Times