bitro LATTICE Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature di illuminazione bitro LATTICE. bitro LATTICE 2. Led carpet matrix lighting system for sign cabinets and large light boxes

Stampa la pagina

INSTALLATION GUIDE

PRECAUTIONS

Use precautions to avoid damages to the product or injuries of users. Any actions against following contents will cause serious

issues such as malfunction, electric shock, or burn.

DC24V

AC INPUT

PREPARATION

TOOLS REQUIRED

Wire Stripper, Drill, Screw Driver, Wiper

PREPARE CHANNELS

1. Clean and remove all debris from

the inside of the box

2. Make holes for wires from modules to SMPS.

3. Without bushins, wires will easily be cut and short-circuit will occur.

* Use white paint inside the box for better reflection

LED Carpet Matrix Lighting System for Sign Cabinets and Large Light Boxes

USE DC24V ONLY

DO NOT USE AC INPUT directly to the LEDs

Do not cut or rejoin wires while product

is connected wth live power source

Avoid performing installation under rain or

high humidity for outdoor use

Do not use the product under circumstances

listed below

- High temperature spots over 60˚C (140˚F)

- Spots draw extreme moisture or dust

2. Drill a 1/4" hole on the corner

The LATTICE

Do not perform actions listed below

- Alter or modify

- Touch LED lamps with sharp objects

- Put glue or silicone over the LED lamps

Maximum driver quantity per serial

connection is limited. Failure causes overload

of current and damages to the product

Refer to 'WIRE THICKNESS' table to use proper

LED module

Failure will cause dimmed output

module is limited.

SUPPLIES REQUIRED

Lattice and power supply, UL Approved parts: Wire Nuts, Cable Ties,

IDC Connectors, VCTF(PLTC) Cable

(Optional : Silicone and Screws)

3. Grommet the hole for supply wire access