Digital Electronics PS3651A-T42 Manuale di installazione - Pagina 15

Sfoglia online o scarica il pdf Manuale di installazione per Monitor Digital Electronics PS3651A-T42. Digital Electronics PS3651A-T42 17.

Stampa la pagina

To prevent the USB cable

from coming off

When using a USB device, attaching the USB

holder to the USB Interface located on the

side of the PS-A unit prevents the USB cable

Interface from becoming disconnected.

• The USB holder cannot be attached to the

USB Interface located on the front of the

PS-A.

Attaching the USB Holder

(1) Before starting the procedure, lift up the

tab on both sides of the USB Holder and

remove the USB Cover.

Tab

(2) Attach the USB holder to the USB

Interface on the side of the PS-A unit.

Hook the upper pick of the USB holder

to the attachment hole of the PS-A unit

and then insert the lower pick as shown

below to fix the USB holder.

(3) Insert the USB cable into the USB

Interface.

USB Cable

Pick

(4) Insert the USB cover into the tab of the

USB holder to fix the USB cable.

Tab

In case of installing the second USB cable,

repeat the steps (3) and (4).

• When attaching the USB holder, be

sure to attach both USB covers, no

matter how many USB cables are

connected.

Removing the USB Holder

Remove USB Holder by the reverse

procedures to the attachment procedures.

(1) Lift up the tab of the USB holder and

then remove the USB cover.

Tab

(2) Remove the USB cable.

(3) Remove the picks pushing the USB

holder from both top and bottom and

then remove the USB holder from PS-A

unit.

USB Cover

(2)

(1)

USB Cover