Bitstream HYPERION-402 Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore Bitstream HYPERION-402. Bitstream HYPERION-402 6. Managed industrial ethernet switch

Stampa la pagina

Quick start manual for

1.3

RJ-45 connectors.

The table shows the lay-out of particular signals for RJ-45 connectors

1 (white and orange)

2 (orange)

3 (white and green)

6 (green)

1 (white and orange)

2 (orange)

3 (white and green)

4 (blue)

5 (white and blue)

6 (green)

7 (white and brown)

8 (brown)

Status signaling of Ethernet interfaces

Each Ethernet port is equipped with two signaling diodes.

The left LED indicates link:

• LED 100M – orange – link 100Mbps (if activity – blinking)

• LED 1000M – green – link 1000Mbps (if activity – blinking)

The right LED indicates the power of PoE:

• LED orange – power indicator flashing for special mode "manual" (Permanently powered port with the PoE

detection turned off)

• LED green – delivered power in PoE+ or PoE++

Distribution of signals for the serial port connectors shown in the following table:

REV.

1.08

Description of device connectors

Fig 5. The look and numbering of leads in RJ45 connector

RJ-45 Ethernet 10/100Mbit/s CONNECTOR

RXAn

RXBn

TXAn

TXBn

RJ-45 Ethernet 1000Mbit/s CONNNECTOR

BI_DA+

BI_DA-

BI_DB+

BI_DC+

BI_DC-

BI_DB-

BI_DD+

BI_DD-

RJ-45

PORT RS232

connector

TX – RX

RX – TX

SHORT USER MANUAL HYPERION-402

H-402

- www.bitstream.pl/ en/

Receiver of channel

Transmitter of channel

Bi-directional +A contact

Bi-directional -A contact

Bi-directional +B contact

Bi-directional +C contact

Bi-directional -C contact

Bi-directional -B contact

Bi-directional +D contact

Bi-directional -D contact

DSUB-9

(female)

GND

2021.03.31

3/6