Digital Equipment Prioris HX 6000 Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Server Digital Equipment Prioris HX 6000. Digital Equipment Prioris HX 6000 17.
Anche per Digital Equipment Prioris HX 6000: Manuale di installazione (16 pagine)

Stampa la pagina

Embedded - PCI VGA controller.

5. Select Save and Exit to save this selection.

Power Down the Server

1. Turn off your server.

2. Disconnect any external devices, the ac power cord, and the

monitor power cord.

3. Unlock the front security lock on the server.

4. Remove the left side panel by sliding it toward the rear of the

server.

WARNING:

you attempt to remove the side panel before unplugging the ac and

monitor power cords.

Remove any Video Option Cards

Before updating the BIOS, you must remove any video option card and

use the embedded PCI VGA controller.

Set Switches on the Main Logic Board

Make sure that the following switches, shown in Figure 1, are set:

SW1-1

SW1-3

Replace the Panel and Reconnect the Cables

1. Install the left side panel. The server will not power up with the

side panel removed.

2. Connect the monitor video cable to the embedded VGA connector

if not already connected.

You might injure yourself or damage your server if

BIOS upgrade

Boot block update

Prioris HX 6000 Server Powergrade Kit

Enabled (On)