Digital Equipment PCXBV-Rx Informazioni sull'installazione e sul funzionamento - Pagina 10
Sfoglia online o scarica il pdf Informazioni sull'installazione e sul funzionamento per Monitor Digital Equipment PCXBV-Rx. Digital Equipment PCXBV-Rx 18. Multimode 15-inch
Stampa la pagina
Installation
1.2 Monitor Installation
1.2 Monitor Installation
To connect your monitor:
1. Make sure the power to the monitor and the computer is off.
2. Connect the monitor's signal cable to the 15-pin interface
connector on the High Resolution Graphic Video Adapter on the
back of the computer.
3. Plug in the ac power cord to the monitor, then to a
properly-grounded ac electrical outlet.
Turn On Power to Monitor
Push the power switch button
indicator LED to the right of this switch should light green.
Figure 1–1 PCXBV-Rx Monitor (Control Panel)
Contrast – Turn this control to adjust the contrast.
Brightness—Turn this control to adjust the brightness.
If the display is too small or not centered, the monitor does not
recognize the input frequency mode. Adjust the position and size of
the display using the controls in Table 1–1
1–2 Installation
to turn on the monitor. The power