Siemens simatic ET 200MP Manuale - Pagina 34

Sfoglia online o scarica il pdf Manuale per Apparecchiature industriali Siemens simatic ET 200MP. Siemens simatic ET 200MP 47. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Anche per Siemens simatic ET 200MP: Manuale (40 pagine), Manuale (24 pagine), Manuale (29 pagine), Manuale (26 pagine), Manuale (28 pagine), Manuale (50 pagine), Manuale (34 pagine), Manuale d'uso (44 pagine), Manuale (30 pagine), Manuale (25 pagine), Manuale (42 pagine), Manuale (28 pagine), Manuale (33 pagine), Manuale (49 pagine), Manuale (36 pagine), Manuale (39 pagine), Manuale (28 pagine), Manuale dell'apparecchiatura (35 pagine), Manuale dell'apparecchiatura (32 pagine), Manuale (29 pagine), Manuale (34 pagine), Manuale (36 pagine), Manuale dell'apparecchiatura (50 pagine), Manuale (45 pagine)

Stampa la pagina

Interrupts and diagnostic, error, and system alarms

5.3 Alarms

Structure of the manufacturer-specific diagnostic data records (firmware version lower than V4.0)

The structure of the diagnostic data records is differentiated by the BlockVersion. The

following BlockVersion applies to the IM 155-5 PN ST interface modules:

Table 5- 6

IM 155-5 PN ST interface module

6ES7155-5AA00-0AB0

Manufacturer-specific diagnostics in the User Structure Identifier (USI)

The following manufacturer-specific diagnostic data is signaled in the USI with the

IM 155-5 PN ST interface module:

Table 5- 7

Manufacturer-specific diagnostics in the USI

USI no. W#16#...

0001

0002

0003

0004

0005

0006

0007

Structure USI = W#16#0001

Table 5- 8

Structure of USI = W#16#0001

Data block name

USI

The first power segment with overload starts at slot: <No.>

Slot

Followed by 3 reserved bytes

Reserved

Structure of the manufacturer-specific diagnostic data records

Diagnostics

Power budget error (overload has been detected in at least one power segment)

Permitted number of power supply modules exceeded

Permitted number of I/O modules exceeded

No U connector detected on an IM port

More than one bus master module (IM/CPU) detected

Communication with slot <No.> has failed

Error IM power supply: Power supply not active or power supply active

Contents

W#16#0001

B#16#00 to B#16#1F

BlockVersion

W#16#0101

Note

Manufacturer-specific diagnostic data

in case of overload in an ET 200MP

power segment

Interface module IM 155-5 PN ST (6ES7155-5AA01-0AB0)

Manual, 11/2017, A5E03612323-AC

Bytes