Siemens SIMATIC ET 200SP HA Manuale dell'apparecchiatura - Pagina 19

Sfoglia online o scarica il pdf Manuale dell'apparecchiatura per Apparecchiature industriali Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 38. Distributed i/o devices busadapter for distributed i/o
Anche per Siemens SIMATIC ET 200SP HA: Manuale (32 pagine), Manuale (50 pagine), Manuale (34 pagine), Manuale (38 pagine), Manuale dell'apparecchiatura (44 pagine), Manuale dell'apparecchiatura (50 pagine), Manuale dell'apparecchiatura (46 pagine), Manuale dell'apparecchiatura (42 pagine), Manuale dell'apparecchiatura (44 pagine), Manuale dell'apparecchiatura (36 pagine), Manuale dell'apparecchiatura (38 pagine)

5.3.4

Channel activated

Definition

Specifies whether a channel is activated or deactivated.

5.3.5

Definition

Specifies if a hardware interrupt should be generated for a rising edge.

5.3.6

Definition

Specifies if a hardware interrupt should be generated for a negative edge.

5.3.7

Definition

A potential group consists of a group of directly adjacent I/O modules within an ET 200SP HA

station that are supplied via a common supply voltage.

Description

A potential group is built up from left to right by using terminal blocks.

A new potential group starts on the left side with a light gray terminal block, via which the supply

voltage for the potential group is fed in.

The potential group is continued to the right with dark gray terminal blocks and ends when a

new potential group is built up next to it.

The potential group also ends if there is a black terminal block next to it. Black terminal blocks

are fed individually and cannot be included in potential groups.

You can find additional information on the configuration of the potential group in the system

manual SIMATIC; Distributed I/O System; ET 200SP HA.

DI 32x24VDC HA

Equipment Manual, 10/2021, A5E48262828-AB

5.3 Explanation of the module/channel parameters

Parameters