Siemens SIMATIC RTLS Manuale di istruzioni per l'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Apparecchiature industriali Siemens SIMATIC RTLS. Siemens SIMATIC RTLS 30. Localization systems
Anche per Siemens SIMATIC RTLS: Manuale di istruzioni per l'uso (21 pagine), Manuale del dispositivo (14 pagine), Manuale di istruzioni per l'uso (20 pagine), Manuale di istruzioni per l'uso (21 pagine)

Siemens SIMATIC RTLS Manuale di istruzioni per l'uso
Installation and operation
3.2 Operation
• Check in the "Localization Configuration" client whether the "CCP" and "Data Sending Period"
parameters are configured the same on both interfaces (green frame, blue frame).
• Restart the gateway via the "Reset" button (red frame).
Variant 2:
The functions of the radio interfaces are retained, but the radio parameters are changed to
match the transponders.
Advantages: Can be done via mass configuration for all devices at the same time.
Disadvantages: Various radio interface conversions, non-ideal antenna configuration in
gateway.
The parameters can be configured in the Locating Manger by a trained commissioning
engineer.
• In the "Localization configuration" client, change UWB channel 5 to UWB channel 2 at "TDoA
timesync (channel IF2)".
• Then change UWB channel 2 to UWB channel 5 in "Localization (channel IF4)".
• Adapt PRF and preamble on both interfaces so that interface 4 (IF4) is configured identically
to the transponder.
• Red frame: Set the UWB channel for interface 2 (IF2) to channel 2 and then click the "Set"
button.
18
Operating Instructions, 08/2023, C79000-G8976-C687-02
SIMATIC RTLS5201T