Siemens SIMATIC RTLS Series Manuale del dispositivo - Pagina 9

Sfoglia online o scarica il pdf Manuale del dispositivo per Apparecchiature industriali Siemens SIMATIC RTLS Series. Siemens SIMATIC RTLS Series 15. Localization systems
Anche per Siemens SIMATIC RTLS Series: Manuale (19 pagine), Manuale del dispositivo (19 pagine), Manuale di istruzioni per l'uso (17 pagine), Manuale di istruzioni per l'uso (26 pagine)

3 Installation, initial start-up, safety

•

•

•

•

SIMATIC RTLS4420G

Device manual, 06/2019, C79000-G8976-C516-02

The devices can only be used in combination with the Locating Manager.

Buildup, installation as well as the use of the tools and clients of the localization system are

described in the corresponding guides and manuals.

Carefully read ALL items listed in section 3 (Installation, initial start-up, safety) before

installing the devices in order to safeguard correct installation and operation.

The device is destined for fitting on a DIN top-hat rail fixed into a housing or onto walls or

ceilings.

The installation has to be carried out by appropriately qualified and trained personnel and

according to the installation guide.

Follow the references concerning the surrounding conditions when installing and operating

the devices.

The device has to be protected against moisture.

The ambient temperature must not exceed 70 °C. Avoid installing devices at locations

exposed to direct sunlight.

The installation of the devices has to be carried out according to the applicable provisions

for the

installation of electrical systems and utilities.

Make sure that any wiring has been carried out correctly before the start-up of the device.

When connecting the power supply to the power connector, all LEDs flash for an instant.

The power LED is on, if power is supplied (cf. states of the LEDs 2.2.1).

Check whether the nominal voltage of the power supply is in accordance with the values

stated in section "Technical data" (cf. 5).