Siemens SIMATIC RTLS4460T Manuale del dispositivo - Pagina 9

Sfoglia online o scarica il pdf Manuale del dispositivo per Apparecchiature industriali Siemens SIMATIC RTLS4460T. Siemens SIMATIC RTLS4460T 14. Localization systems
Anche per Siemens SIMATIC RTLS4460T: Manuale di istruzioni per l'uso (22 pagine)

Siemens SIMATIC RTLS4460T Manuale del dispositivo

3 Installation, initial start-up, safety

3.1 General information

The devices can only be used in combination with the Locating Manager.
Buildup, installation as well as the use of the tools and clients of the localization system are
described in the corresponding guides and manuals.

3.2 Installation and operation

Carefully read all items listed in section 3 (Installation, initial start-up, safety) before installing
the devices in order to safeguard correct installation and operation.
The device is destined for installation into a vehicle.
The installation has to be carried out by appropriately qualified and trained personnel and
according to the installation guide.
Follow the references concerning the surrounding conditions when installing and operating the
devices.
The device has to be protected against moisture.
The ambient temperature must not exceed 70 °C. Avoid installing devices at locations exposed
to direct sunlight.
The installation of the devices has to be carried out according to the applicable provisions for
the installation of electrical systems and utilities.

3.3 Connecting the cables

Make sure that any wiring has been carried out correctly before the start-up of the device.

3.3.1 Power supply

When connecting the power supply to the power connector, all LEDs flash for an instant. The
power LED is on, if power is supplied (cf. states of the LEDs 2.2.1).
Check whether the nominal voltage of the power supply is in accordance with the values stated
in section "Technical data" (cf. 4).

3.4 Connecting the antenna

The antenna has to be connected to the RP-SMA screw connector (P2).
The device must not be operated without antenna. The device has to be switched off or voltage-
free before replacing the antenna.
The antennas of all wireless devices should be aligned similarly.
SIMATIC RTLS4460T
Device manual, 06/2019, C79000-G8976-C522-02
9