Siemens SINAMICS G120 Come iniziare - Pagina 10

Sfoglia online o scarica il pdf Come iniziare per Apparecchiature industriali Siemens SINAMICS G120. Siemens SINAMICS G120 50. Using blocksize converters in marine applications
Anche per Siemens SINAMICS G120: Come iniziare (46 pagine), Manuale di istruzioni per l'uso (32 pagine), Come iniziare (30 pagine), Istruzioni per l'installazione dell'hardware (2 pagine), Istruzioni per l'installazione e manuale d'uso (2 pagine), Istruzioni per l'installazione (2 pagine), Istruzioni per l'installazione (2 pagine), Istruzioni per l'uso compatte (32 pagine), Manuale (42 pagine), Manuale del dispositivo (34 pagine), Manuale di installazione rapida (2 pagine), Descrizione dell'applicazione (50 pagine), Istruzioni per l'uso compatte (2 pagine), Manuale (31 pagine), Manuale delle applicazioni (34 pagine), Istruzioni per l'uso compatte (2 pagine), Istruzioni per l'uso compatte (2 pagine)

Stampa la pagina
Siemens SINAMICS G120 Come iniziare
Fundamental safety instructions
1.1 General safety instructions
NOTICE
Device damage caused by incorrect voltage/insulation tests
Incorrect voltage/insulation tests can damage the device.
• Before carrying out a voltage/insulation check of the system/machine, disconnect the
Danger to life when safety functions are inactive
Safety functions that are inactive or that have not been adjusted accordingly can cause
operational faults on machines that could lead to serious injury or death.
• Observe the information in the appropriate product documentation before
• Carry out a safety inspection for functions relevant to safety on the entire system,
• Ensure that the safety functions used in your drives and automation tasks are adjusted
• Perform a function test.
• Only put your plant into live operation once you have guaranteed that the functions
Note
Important safety notices for Safety Integrated functions
If you want to use Safety Integrated functions, you must observe the safety notices in the
Safety Integrated manuals.
Danger to life or malfunctions of the machine as a result of incorrect or changed
parameterization
As a result of incorrect or changed parameterization, machines can malfunction, which in
turn can lead to injuries or death.
• Protect the parameterization (parameter assignments) against unauthorized access.
• Respond to possible malfunctions by applying suitable measures (e.g. EMERGENCY
10
devices as all converters and motors have been subject to a high voltage test by the
manufacturer, and therefore it is not necessary to perform an additional test within the
system/machine.
WARNING
commissioning.
including all safety-related components.
and activated through appropriate parameterizing.
relevant to safety are running correctly.
WARNING
STOP or EMERGENCY OFF).
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB