Siemens SINUMERIK 840D sl Manuale di messa in servizio - Pagina 6

Sfoglia online o scarica il pdf Manuale di messa in servizio per Apparecchiature industriali Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 36. Operator panel front: op 010s
Anche per Siemens SINUMERIK 840D sl: Istruzioni per l'aggiornamento (4 pagine), Istruzioni per l'aggiornamento (5 pagine), Manuale operativo (33 pagine), Istruzioni per l'aggiornamento (3 pagine), Istruzioni per l'aggiornamento (3 pagine), Manuale del sistema (44 pagine), Manuale dell'apparecchiatura (28 pagine), Manuale dell'apparecchiatura (48 pagine), Manuale dell'apparecchiatura (26 pagine), Manuale dell'apparecchiatura (28 pagine)

Fundamental safety instructions

1.1 General safety instructions

Electric shock due to equipment damage

Improper handling may cause damage to equipment. For damaged devices, hazardous

voltages can be present at the enclosure or at exposed components; if touched, this can

result in death or severe injury.

● Ensure compliance with the limit values specified in the technical data during transport,

● Do not use any damaged devices.

Electric shock due to unconnected cable shields

Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected

cable shields.

● As a minimum, connect cable shields and the cores of cables that are not used at one end

Electric shock if there is no ground connection

For missing or incorrectly implemented protective conductor connection for devices with

protection class I, high voltages can be present at open, exposed parts, which when touched,

can result in death or severe injury.

● Ground the device in compliance with the applicable regulations.

Spread of fire from built-in devices

In the event of fire outbreak, the enclosures of built-in devices cannot prevent the escape of

fire and smoke. This can result in serious personal injury or property damage.

● Install built-in units in a suitable metal cabinet in such a way that personnel are protected

● Ensure that smoke can only escape via controlled and monitored paths.

WARNING

storage and operation.

WARNING

at the grounded housing potential.

WARNING

against fire and smoke, or take other appropriate measures to protect personnel.

SINUMERIK Software Update Tool

Commissioning Manual, 03/2018, A5E42187770B AA