Samsung 5 Series Manuale d'uso - Pagina 37

06 Troubleshooting and Maintenance

If the TV seems to have a problem, ﬁrst review this list of possible problems and solutions. Alternatively, review

the Troubleshooting Section in the e-Manual. If none of these troubleshooting tips apply, please visit "www.

samsung.com" and click on Support, or contact the Samsung service centre listed on the back cover of this

manual.

• This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may

be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance

of the product.

• To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto update

functions on the TV's menu (

The TV won't turn on.

• Make sure that the AC power cable is securely plugged in to the TV and the wall outlet.

• Make sure that the wall outlet is working and the remote control sensor at the bottom of the TV is lit and

glowing a solid red.

• Try pressing the TV Controller button at the bottom of the TV to make sure that the problem is not with the

remote control. If the TV turns on, refer to "The remote control does not work".

There is no picture/video/sound, or a distorted picture/video/sound from an external

device, or "Weak or No Signal" is displayed on the TV, or you cannot ﬁnd a channel.

• Make sure the connection to the device is correct and that all cables are fully inserted.

• Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible.

• Conﬁrm that the correct input source has been selected (

• Perform a TV self diagnosis to determine if the problem is caused by the TV or the device (

Support > Device Care > Self Diagnosis > Picture Test or Sound Test).

• If the test results are normal, reboot the connected devices by unplugging each device's power cable and

then plugging it in again. If the issue persists, refer to the connection guide in the user manual of the

connected device.

• If you are not using a cable box or satellite box, and your TV is receiving TV signals from an antenna or

a cable wall connector, run Auto Tuning to search for channels (

Tuning Settings) > Auto Tuning).

– The Auto Tuning Settings may not appear depending on the model or geographical area.

– If you are using a cable box or satellite box, please refer to the cable box or satellite box manual.

Settings > Support > Software Update > Update Now or Auto update).

Source).

Settings > Broadcasting > (Auto

Settings >

English - 15