Cisco 30 VIP Manuale del sistema - Pagina 28

Sfoglia online o scarica il pdf Manuale del sistema per Telefono IP Cisco 30 VIP. Cisco 30 VIP 50. Cisco unified ip phones chapter 43
Anche per Cisco 30 VIP: Manuale del sistema (36 pagine)

Stampa la pagina

1. Phone Features

Directory Numbers

Cisco CallManager System Guide

40-28

the call on hold, user can retrieve the call from the Cisco IP Phone 1 or

Cisco IP Phone 2. When User 2 dials directory number 2000 for the second

call, only Cisco IP Phone 2 and Cisco IP Phone 3 ring.

The following example demonstrates how an H.323 client, MGCP POTS

Phone, and Cisco IP Phone with the same shared line appearance, directory

number 2000, can use the Call Forward Busy Trigger and the Maximum

Number of Calls settings. This example assumes that two calls occur. The

following values have been configured for the devices:

H.323 client—Configured for a maximum call value of 1 and busy trigger

–

value of 1

MGCP POTS Phone—Configured for a maximum call value of 1 and

–

busy trigger value of 1

–

Cisco IP Phone—Configured for a maximum call value of 2 and busy

trigger value of 2

When User 1 dials directory number 2000 for the first call, all three devices

ring. The user for the Cisco IP Phone picks up the call; when the user for

Cisco IP Phone puts the call on hold, the user(s) for H323 client and MGCP

POTS Phone cannot retrieve the call. If User 2 dials directory number 2000

for the second call, only the Cisco IP Phone rings. Users for the MCGP POTS

Phone or the H.323 Client cannot answer the call.

For information on Maximum Number of Calls setting, refer to the

Number Configuration Settings"

Guide.

The check box, Update Directory Number of All Devices Sharing this Line,

in the Directory Number Configuration window, determines whether a shared

directory number gets updated to all devices sharing the number. Refer to the

"Update Directory Number of All Devices Sharing this Line" section on

page 40-30

for more information.

A shared line phone should not be able to interact with the call that it rejects,

due to the limitation of the maximum number of calls per DN or for other

reasons. For example, A and A' share the same DN. A' and A have the

maximum number of calls set to 1 and 2, respectively. When C and D call the

share line DN, A' answers these two calls. A can only interact with the first

call, as it rejects the second call due to its own maximum number of calls per

DN limitation. For this reason, Cisco recommends that the same value be

configured for the maximum number of calls for all shared line MCID

Chapter 40

in the Cisco CallManager Administration

Cisco IP Phones

"Directory

OL-7135-01