Cisco 3600 Series Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco 3600 Series. Cisco 3600 Series 25. Memory upgrade
Anche per Cisco 3600 Series: Panoramica del prodotto (10 pagine), Istruzioni per l'aggiornamento (30 pagine), Manuale d'uso (17 pagine), Nota applicativa (41 pagine), Manuale di configurazione (36 pagine), Appendice (15 pagine), Manuale d'uso (7 pagine), Manuale (5 pagine), Nota di configurazione (23 pagine), Nota di configurazione (18 pagine), Nota di configurazione (25 pagine)

Stampa la pagina

V.110 Support for Cisco 3600 Series Digital Modems

show modem configuration

To display the current modem configuration for digital MICA technologies modems loaded inside an

access server or router, use the show modem configuration EXEC command.

Syntax Description

slot/port

Defaults

There are no default behaviors or values for this command.

Command Modes

EXEC

Command History

Release

11.2P

12.1(5)T

Examples

The following example shows the display output when using the show modem configuration command.

A specific modem, 0/0, has been designated. V.110 information is highlighted in this example.

Router# show modem configuration 0/0

S-Reg

——-|——-|———————————————

show modem configuration [slot/port]

(Optional) Specifies the location of a slot and modem port. If this number

is not specified, statistics for all connected modems are displayed.

Remember to include the forward slash (/) when entering this variable.

Modification

This command was introduced.

This command was modified to show output display for Cisco 3600 series

digital modems that support V.110.

Value

Meaning

S-- = 1

Country Code is Default u-law

S00 = 0

Auto Answer immediately

S01 = 0

Reserved

S02 = 43

escape character is 0x2B or '+'

S03 = 13

carriage return character is 0xD

S04 = 10

line feed character is 0xA

S05 = 8

backspace character is 0x8

S06 = 2

pause 2 seconds before blind dialing

S07 = 60

wait up to 60 seconds for carrier after dialing

S08 = 2

comma adds 2 second dial delay

S09 = 317

BitMap register value = 0x13D

S10 = 14

1.4 second delay for hangup after carrier loss

S11 = 0

In Answer Mode

S12 = 3

3 Data Bits

S13 = 3

Space Parity

S14 = 1

1 Stop Bits

S15 = 1

V.42 ODP generation enabled

S16 = 50

5.0 second Error Correction autodetect timeout

S17 = 100

10.0 second Error Correction negotiation timeout

S18 = 13

Error Correction fallback char is 0xD

S19 = 12

Error Correction retransmission limit is 12

S20 = 256

Error Correction frame length is 256 octets

S21 = 3

V42bis or MNP Data Compression

show modem configuration

Cisco IOS Release 12.1(5)T