Cisco 3600 Series Manuale d'uso - Pagina 22

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco 3600 Series. Cisco 3600 Series 25. Memory upgrade
Anche per Cisco 3600 Series: Panoramica del prodotto (10 pagine), Istruzioni per l'aggiornamento (30 pagine), Manuale d'uso (17 pagine), Nota applicativa (41 pagine), Manuale di configurazione (36 pagine), Appendice (15 pagine), Manuale d'uso (7 pagine), Manuale (5 pagine), Nota di configurazione (23 pagine), Nota di configurazione (18 pagine), Nota di configurazione (25 pagine)

show modem operational-status

To display performance statistics for individual modems, use the show modem operational-status

user EXEC and privileged EXEC command.

Cisco AS2600, Cisco AS3600 series, Cisco AS5200, and Cisco AS5300 series access servers

Cisco AS5800 series access servers

Syntax Description

shelf/slot/port

Defaults

There are no default behaviors or values for this command.

Command Modes

User EXEC and privileged EXEC

Command History

Release

11.2(10)P

12.1(5)T

Usage Guidelines

The show modem operational-status command is supported only on systems with internal MICA

technologies or Microcom analog (NM-AM) modems, but not in systems with internal Microcom

digital modems. To display performance statistics for access servers, use the following command

sequence:

Router# modem at-mode s/p AT@E1

Sample output and explanations of the AT@E1 modem command are provided in the document AT

Command Set and Register Summary for Analog Modem Network Modules , found in the Analog

Modem Firmware index of the Cisco 3600 Series Router documentation on CCO.

Cisco IOS Release 12.1(5)T

show modem operational-status [slot/port]

show modem operational-status [shelf/slot/port]

(Optional) Specifies the location of the shelf (Cisco AS5800 access server

only) and slot and modem port. If these numbers are not specified, statistics

for all connected modems are displayed. (Remember to include the forward

slash (/) when entering these variables.)

Modification

This command was introduced.

This command was modified to include information for Cisco 3600 series

routers.

V.110 Support for Cisco 3600 Series Digital Modems