Cisco 6941 - Unified IP Phone Slimline VoIP Manuale di amministrazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di amministrazione per Telefono IP Cisco 6941 - Unified IP Phone Slimline VoIP. Cisco 6941 - Unified IP Phone Slimline VoIP 19. Two-line ip endpoint supporting both video and light-to-moderate voice communications
Anche per Cisco 6941 - Unified IP Phone Slimline VoIP: Scheda tecnica (5 pagine), Note di rilascio (18 pagine), Scheda tecnica (5 pagine), Manuale d'uso (38 pagine), Manuale di amministrazione (14 pagine), Manuale di configurazione (16 pagine), Caratteristiche (29 pagine), Manuale d'uso (24 pagine), Manuale di riferimento rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale di riferimento (4 pagine), Scheda di riferimento rapido (2 pagine), Manuale d'uso (7 pagine), Manuale di riferimento rapido (2 pagine), Manuale di avvio rapido (4 pagine)

Cisco 6941 - Unified IP Phone Slimline VoIP Manuale di amministrazione
Release DHCP Address
Release DHCP Address
Procedure
Step 1
Scroll to the DHCP Address Released option.
Step 2
Press Edit.
Step 3
Press Yes to release the DHCP Address.
DHCP Usage
If you are configuring the Ethernet network settings on the phone for an IP network, you can set up an IP
address for the phone by either using DHCP or manually entering an IP address.
You must also enter the domain name for the phone in the Ethernet Setup page.
Note
Set Up Phone To Use DHCP
To enable DHCP and allow the DHCP server to automatically assign an IP address to the Cisco Unified IP
Phone and direct the phone to a TFTP server, perform these steps:
Procedure
Step 1
Press Applications and choose Administrator Settings > Network Setup > Ethernet Setup > IPv4 Setup.
Step 2
To enable DHCP, set DHCP Enabled to Yes. DHCP is enabled by default.
Step 3
To use an alternate TFTP server, set Alternate TFTP Server to Yes, and enter the IP address for the TFTP
Server.
Note
Step 4
Press Apply,
Set Up Phone To Not Use DHCP
When not using DHCP, you must configure the IP address, subnet mask, TFTP server, and default router
locally on the phone.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications
Manager 10.0 (SCCP and SIP)
12
Consult with the network administrator to determine whether you need to assign an alternative TFTP
server instead of using the TFTP server that DHCP assigns.
Cisco Unified IP Phone Settings