Cisco 730 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco 730. Cisco 730 16. Ip phones with multiplatform firmware
Anche per Cisco 730: Manuale d'uso (46 pagine), Manuale di amministrazione (36 pagine), Manuale di installazione (39 pagine), Manuale d'uso (44 pagine)

Bluetooth LED

The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and

shows your headset connection status.

Table 1: Bluetooth LED Status

Light Status

Solid blue, then off

Blinks blue

Manage Your Bluetooth Connections in the Cisco Headsets App

You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can

save up to eight Bluetooth devices and maintain an active connection with two at the same time.

Procedure

Step 1

On your mobile device, open the Cisco Headsets app.

Step 2

Tap Connected to at the bottom of the home screen.

Step 3

Select the device you wish to connect or disconnect.

Use the USB Adapter

Your Cisco Headset 730 comes with a USB adapter for use with call devices that don't have a Bluetooth

option. The USB Adapter comes out of the box pre-paired to your headset. The adapter automatically connects

to your headset when it plugs into a powered USB port.

When you connect the USB Adapter, the LED blinks and then turns solid when it connects to your headset.

If your headset is unavailable to connect, the LED shuts off.

When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10

minutes for your headset to accept another active Bluetooth connection after you disconnect the USB Adapter.

You can also turn off your headset then on again to pair a new device quickly.

Your Headset

System State

Successful Bluetooth connection

Headset in Pairing Mode

Your Headset