Siemens CD634GB 1W Series Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Forno Siemens CD634GB 1W Series. Siemens CD634GB 1W Series 32.

Stampa la pagina
Setting the date
Use the rotary selector to set the current day, month
1.
and year.
Touch the ¿ field.
2.
The next setting appears.
Setting the water hardness
Turn the rotary selector to the right until your water
1.
hardness range appears.
Touch the arrow ¿ to confirm.
2.
A note appears in the display confirming that the
initial use has been completed.
Calibrating the appliance and cleaning the
cooking compartment
Before using the appliance to prepare food for the first
time, you must calibrate the appliance and clean the
cooking compartment.

Calibrating the appliance and cleaning the cooking

compartment

Preparing calibration
Remove the accessories from the cooking
1.
compartment.
Remove leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before calibrating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft, wet
cloth.
Calibrating the appliance and cleaning the cooking
compartment
Notes
The calibration can only be started once the cooking
■
compartment is cold (room temperature).
Do not open the appliance door during calibration.
■
Doing this will interrupt calibration.
Press the u button to switch on the appliance.
1.
Fill the water tank.
2.
Set the specified type of heating, temperature and
3.
cooking time, then start the appliance operation.
Settings
Type of heating
Steam é
Temperature
100 °C
Duration
20 minutes
Press the u button to switch off the appliance.
4.
Wait until the cooking compartment has cooled
5.
down.
Clean the smooth surfaces with soapy water and a
6.
dish cloth.
Empty the water tank and dry the cooking
7.
compartment.
Before using for the first time
Notes
So that the appliance adapts to a new installation
■
location after moving house, reset the appliance to
the factory settings. Repeat the initial use settings
and the calibration.
The appliance saves the calibration settings, even in
■
the event of a power cut or disconnection from the
mains. Recalibration is not necessary.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
en
11