Siemens CM676G0.6 Manuale d'uso e istruzioni per l'installazione - Pagina 22
Sfoglia online o scarica il pdf Manuale d'uso e istruzioni per l'installazione per Forno Siemens CM676G0.6. Siemens CM676G0.6 48.
en Basic settings
15.3 Operating the appliance with the
Home Connect app
When the Remote start function is activated, you can
use the Home Connect app to remotely configure the
appliance's settings and start it.
Note: Some operating modes can only be started on
the oven itself.
Requirements
¡ The appliance must be switched on.
¡ The appliance must be connected to your home net-
work and to the Home Connect app.
¡ To configure the appliance's settings using the
Home Connect app, "Remote control" must be
switched on in the basic settings. When the Remote
start function is deactivated, only the appliance's op-
erating statuses are displayed in the Home Con-
nect app.
1.
Tap
.
2.
Tap "Remote start".
a The display will show .
3.
Configure a setting in the Home Connect app and
send it to the appliance.
Notes
¡ If you open the appliance door within 15 minutes
of activating the Remote start function or of the
set program ending, the Remote start function
will be deactivated.
¡ When you start the oven using the controls on
the appliance itself, the Remote start function is
activated automatically. You can use the
Home Connect app to adjust the settings or start
a new program.
15.4 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
16 Basic settings
You can configure the appliance to meet your needs.
16.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Language
Clock
1
Factory setting (may vary according to model)
22
Selection
See selection on the appli-
ance.
Clock in 24-hour format.
stalling it via the Home Connect app if you are in your
WLAN home network (Wi-Fi). The Home Connect app
will inform you once installation is successful.
Notes
¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡ We recommend that you install security updates as
soon as possible.
¡ Installation takes a few minutes. You cannot use
your appliance during installation.
15.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
15.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
Basic setting
Date – day
Date – month
Date – year
Signal tone
Button tone
Display brightness
1
Factory setting (may vary according to model)
Selection
Sets the current day
Sets the current month
Sets the current year
Short cooking time
1
Medium cooking time
Long cooking time
Switched on
1
Switched off
5 settings