Siemens HA010FBR1M Manuale d'uso e istruzioni per l'installazione - Pagina 27

Sfoglia online o scarica il pdf Manuale d'uso e istruzioni per l'installazione per Forno Siemens HA010FBR1M. Siemens HA010FBR1M 28.
Anche per Siemens HA010FBR1M: Manuale di istruzioni (28 pagine)

Siemens HA010FBR1M Manuale d'uso e istruzioni per l'installazione
14.8 Power cable with protective contact
plug
Connect the appliance only to a correctly installed,
earthed socket.
If the plug can no longer be accessed following install-
ation, provide a separator in the phases in the fixed
electrical installation in accordance with the set-up in-
structions.
14.9 Power cable without protective contact
plug
Only allow a licensed professional to connect the appli-
ance.
Provide a separator in the phases in the fixed electrical
installation in accordance with the construction instruc-
tions. Identify the phase conductor and the neutral con-
ductor (zero conductor) in the socket. An incorrect con-
nection may damage the appliance.
Only connect in accordance with the connection dia-
gram. The information about the voltage can be found
on the rating plate. Connect the wires of the mains
power cable according to the colour coding:
Cable colour
Green-yellow
Blue
Brown
14.10 Only Sweden, Finland and Norway
You can also connect the appliance to the protective
contact system with the enclosed plug. The plug must
be accessible following the installation. If the plug can
no longer be accessed following installation, provide a
separator in the phases in the fixed electrical installa-
tion in accordance with the set-up instructions.
14.11 Securing the appliance
¡ Slide the appliance in fully and centre it.
¡ Screw the appliance into place.
The gap between the worktop and the appliance must
not be closed by additional battens.
Do not attach any thermal insulation strips to the side
panels of the surround unit.
To remove:
¡ Disconnect the appliance from the power supply.
¡ Undo the fastening screws.
¡ Lift the appliance slightly and pull it out completely.
Cable type
Earthing cable
Neutral conductor (zero)
Phase conductor (external
conductor)
Installation instructions en
27