Epson 835p - PowerLite XGA LCD Projector Informazioni sul prodotto - Pagina 19

Stampa la pagina

Epson 835p - PowerLite XGA LCD Projector Informazioni sul prodotto

10. Gently insert the new lamp. (If it doesn't fit easily, make

sure it is facing the right way.)

11. Once the lamp is fully inserted, tighten its screws and

replace the cover, then tighten the cover screw. (The

projector won't turn on if the lamp cover is loose.)

12. Reset the lamp timer as described below.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer

using the projector's menus.

1. Press the

button on the remote control or on the

projector's control panel. You see the main menu.

2. Use the

pointer button on the remote control (or the

arrow buttons on the projector) to highlight

press

Enter

You see this screen:

3. Select

Lamp Hours Reset

prompt:

4. Select

and press

Yes

Enter

5. When you're finished, press

Transporting the Projector

The projector contains many glass and precision parts. Follow

these guidelines to prevent damage:

When shipping the projector for repairs, use the original

packaging material if possible. If you do not have the

original packaging, use equivalent materials, placing plenty

of cushioning around the projector.

, then

Reset

and press

. You see this

Enter

to exit.

Esc

When transporting the projector a long distance, first place

it in a hard-shell shipping case, then pack it in a firm box

with cushioning around the case. (An optional case is

available from Epson.)

Note: Epson shall not be liable for any damages incurred

during transportation.

10/04

Epson PowerLite 835p