Cisco 7905 serie Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco 7905 serie. Cisco 7905 serie 16.

Note

If your Ethernet cable has a cover over the RJ-45

connector, the cover can cause the phone to be

unsteady, and the phone may rock from side to side.

Pull the cable cover back to expose the RJ-45 connector

to avoid this.

Step 2

Connect the handset to the handset port. Ensure that

the end of the cord with the longer uncoiled section is

connected to the body of the phone.

Step 3

Connect the DC power supply connector from the

adaptor to the 5Vdc jack on the back of the phone.

Caution

Only use the 5Vdc power adapter that was

provided with the phone.

Step 4

Use the power cord to connect the power supply to a

standard power outlet in your workspace.

After you connect the Cisco IP Phone to its power source, a

start-up process begins. After several minutes, the phone's LCD

displays a neutral "ready" screen. The details on your screen

might vary, but a ready screen typically displays the date and

time, your extension number, and available soft keys. Startup is

complete and your phone is ready to use.

Tip

Soft keys point to feature options displayed along the

bottom of your LCD screen. Soft keys are

flexible—they change depending on the status of your

phone. For example, you can see one set of soft key

options when you pick up the handset, and another set

when the phone is not in use.