Siemens WM12K160HK Manuale di istruzioni e istruzioni per l'installazione - Pagina 20
Sfoglia online o scarica il pdf Manuale di istruzioni e istruzioni per l'installazione per Lavatrice Siemens WM12K160HK. Siemens WM12K160HK 40.
Stampa la pagina
Operating the appliance
en
Do not leave the washing
Note:
machine door open for too long when
adding laundry as water from the
laundry may leak out.
If the display panel shows:
Both the YES and v symbols lit up,
■
it is possible to add laundry.
A flashing NO symbol, wait until YES
■
and v light up.
Do not open the door until both the
YES and the v symbols are lit.
A flashing NO symbol, it is not
■
possible to add laundry.
For safety reasons, the washing
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry.
To continue the programme, press
the Start/Reload ! button. The
programme continues automatically.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press Start/Reload ! .
1.
Select the other programme.
2.
Press Start/Reload ! . The new
3.
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
Press Start/Reload ! .
1.
To cool the laundry: Select
2.
Rinse q .
Press Start/Reload ! .
3.
For programmes at low temperatures:
Press Start/Reload ! .
1.
Select 0 Spin/Drain p .
2.
Press Start/Reload ! .
3.
20
Programme end during rinse
hold
– – – 0 appears on the display panel
and the Start/Reload ! button indicator
lamp flashes.
To end the programme, set the
programme selector to 0 Spin/
Drain p or select a spin speed. Then
press the Start/Reload ! button.
Programme end
End appears on the display panel and
the Start/Reload ! button indicator
lamp is off.
If the x symbol appears on the display
panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Add less detergent for the next
Note:
washing cycle with the same load.
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Set the programme selector to off
2.
position. The appliance is switched
off.
Turn off the water tap.
3.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.