Epson AP-60 - Projector Sound Solution Bollettino di assistenza prodotti - Pagina 3

Sfoglia online o scarica il pdf Bollettino di assistenza prodotti per Proiettore Epson AP-60 - Projector Sound Solution. Epson AP-60 - Projector Sound Solution 8. Projector sound solution
Anche per Epson AP-60 - Projector Sound Solution: Manuale d'uso (28 pagine), Manuale (5 pagine), Manuale di installazione (28 pagine), Manuale di connessione (1 pagine), Elenco delle parti (1 pagine), Opuscolo e specifiche (4 pagine)

Stampa la pagina

Epson AP-60 - Projector Sound Solution Bollettino di assistenza prodotti

1) Connect the power cable to the AP-60 unit (Power LED is solid orange) -- do not turn it

on. Verify the null modem cable is connected to the AP-60 unit RS-232c and computer RS-

232c serial ports.

When the AP-60 is in Standby Mode, hold down the Power button (black button on the

front left side of the audio control board) for at least 3 seconds or more until

the Power light LED shows blinking green—release when the Power LED is blinking green.

a) If the Power LED does not show blinking green, set the projector to standby mode

and hold down the power button again for 3 seconds or more.

b) Right-click My Computer on the PC desktop screen then click Manage.

2. Click Device Manager and expand Ports (COM & LPT). Then note the available

COM Port number. The following example shows the assigned port number as COM1.

Page 3 of 8

PSB.2010.01.001