Siemens XQG80-WM10P1601W Manuale di istruzioni e istruzioni per l'installazione - Pagina 13
Sfoglia online o scarica il pdf Manuale di istruzioni e istruzioni per l'installazione per Lavatrice Siemens XQG80-WM10P1601W. Siemens XQG80-WM10P1601W 40.
Anche per Siemens XQG80-WM10P1601W: Manuale di istruzioni e istruzioni per l'installazione (34 pagine)
Stampa la pagina
Measuring aid* for liquid detergent
Position the measuring aid for
measuring the correct amount of liquid
detergent:
Pull out the detergent drawer. Insert
1.
the liquid detergent container into
dispenser II for main wash.
Pour liquid detergent into liquid
2.
detergent container and do not
exceed the Maximum mark.
Reinsert the drawer.
3.
Do not use the viscous liquid
Note:
detergent.
Start the programme
Touch
button. The indicator light is on.
Childproof lock
To Activate the childproof lock:
After the programme starts for finish in
time is activated ~page, touch and hold
the
0 (Spin speed) and
(Finish in) button at the same time for 3
seconds;
I (Start/Pause)
û
Operating the appliance
Release when the w symbol lights up.
If button signal is on, an acoustic signal
will be heard. When the programme
ends, End is displayed. The door is
closed. w symbol and the
I (Start/Pause) indicator remains on
to remind you to deactivate the
childproof lock.
To deactivate the childproof lock:
Touch
0 (Spin speed) and
(Finish in) button at the same time until
the w symbol turns off.
Release the button.
w symbol flashes if the programme
has been changed while childproof lock
is activated. The original programme will
go on running.
If the childproof lock is deactivate while
the programme selector is in a different
position from when the childproof lock
was activated, the running programme
will be halted.
Reload the laundry
When the programme has started, the
laundry can be reloaded or taken out as
required.
Select
appliance checks whether reloading is
possible.
Notes
If there is a high water level, high
■
temperature or if the drum is
rotating, the door remains locked
for safety reasons and reloading is
not possible.
If the symbol è goes out,
reloading is possible.
If the symbol è is still lit ~
Reloading is not possible.
To continue the programme, select
the
button.
Do not open the door until the
■
symbols è goes out.
I (Start/Pause). The
I (Start/Pause)
en
û
13