Cisco 7925G - Unified Wireless IP Phone VoIP Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Telefono IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 21. Wavelink avalanche management console
Anche per Cisco 7925G - Unified Wireless IP Phone VoIP: Scheda tecnica (8 pagine), Note di rilascio (16 pagine), Manuale d'uso (28 pagine), Manuale degli accessori (20 pagine), Manuale degli accessori (13 pagine), Manuale di amministrazione (19 pagine), Manuale d'uso (10 pagine), Manuale d'uso (16 pagine), Manuale rapido (14 pagine), Manuale di amministrazione (23 pagine), Manuale di amministrazione (14 pagine)

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup

After registering the phones, you can modify settings, such as the DNs and device pools, by using

Cisco Unified Communications Manager Administration.

Autoregistration is disabled by default in Cisco Unified Communications Manager Administration. You

Note

must enable and properly configure autoregistration before connecting any Cisco Unified IP Phone to the

network. For information about enabling and configuring autoregistration, see Cisco

Unified Communications Manager Administration Guide.

Autoregistration and TAPS Phone Addition

Use autoregistration and TAPS to add phones to the Cisco Unified Communications Manager database. Add

the phones first by using BAT to the Cisco Unified Communications Manager database with dummy MAC

addresses. Then use TAPS to update MAC addresses and download predefined configurations for the phones.

To implement TAPS, dial a TAPS DN and follow voice prompts. When the process is complete, the phone

has downloaded its DN and other settings. The correct MAC address for the phone is updated in

Cisco Unified Communications Manager Administration.

You must enable autoregistration in Cisco Unified Communications Manager Administration for TAPS

Note

to function.

For Cisco Unified Communications Manager Release 5.0 or earlier, see Bulk Administration Tool User Guide

for Cisco Unified Communications Manager for detailed instructions about BAT and TAPS. For Cisco Unified

Communications Manager Release 6.0 or later, see Cisco Unified Communications Manager Bulk

Administration Guide.

Add a group of phones to the Cisco Unified Communications Manager database by using BAT. This tool

performs batch operations, including registration, on multiple phones. You need the MAC addresses for each

phone before you use BAT.

The following table describes how to determine the MAC address of the wireless IP phone.

Table 2: Determine the MAC Address of the Phone

Method

Choose SETTINGS > Model Information

> MAC Address and look at the MAC

Address field.

Remove the battery and look on the back of

the phone.

Cisco Unified Communications Manager Phone Addition Methods

For more information

See

View Model Information Screen

See

Install or Remove Phone Battery, on page 9

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide