ACD DS260 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Palmari ACD DS260. ACD DS260 16.

3.2.1 Charging the Power Supply Unit for the DS260 & M260SE

The M260SE and the spare battery may only be charged in the DS260 docking station with the respective

power supply unit.



External power supply unit for DS260



Input voltage



Output voltage



Power cable (country-specific)

Unintended use of the interfaces should be avoided.

ATTENTION

The battery compartment is located on the rear of the device. In order to remove the battery, first remove the

transverse hand strap by simply unhooking it. Now push the locking tab on the battery towards the battery

surface (Figure 3.). The battery can now be removed from the tab.

The battery can easily be inserted. In doing so, ensure that you insert the battery at a slight incline towards

the contacts and hook it on the fixing tab whilst doing so. Then close the locking mechanism with a slight

amount of pressure.

Figure 3: Inserting the Battery

M260SE_Brief_Overview_FCC_V1.00_en_es.docx

100 – 240 V AC; 0.8 A; 50 – 60 Hz

15 V DC; 2.4 A

8 / 33