Siemens SITRANS LVL100 Manuale di istruzioni per l'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Interruttore Siemens SITRANS LVL100. Siemens SITRANS LVL100 32. Vibrating switches
Anche per Siemens SITRANS LVL100: Manuale di istruzioni per l'uso (32 pagine), Manuale di istruzioni per l'uso (33 pagine), Manuale di istruzioni per l'uso (32 pagine)

Suitability for the process

conditions

Suitability for the ambient

conditions

Switching point

Mounting

4.1

Make sure that all parts of the instrument coming in direct contact

with the process, especially the sensor element, process seal and

process fitting, are suitable for the existing process conditions, such

as process pressure, process temperature as well as the chemical

properties of the medium.

You can find the specifications in chapter "Technical data" and on the

nameplate.

The instrument is suitable for standard and extended ambient condi-

tions acc. to DIN/EN/IEC/ANSI/ISA/UL/CSA 61010-1.

In general, SITRANS LVL100 can be installed in any position. The

instrument only has to be mounted in such a way that the tuning fork

is at the height of the desired switching point.

Keep in mind that the swichting point can vary dependent on the

installation position.

The switching point refers to the medium water (1 g/cm³/0.036 lbs/

in³). Please keep in mind that the switching point of the instrument

shifts when the medium has a density differing from water.

Fig. 2: Vertical mounting

Switching point in water

Switching point with lower density

Switching point with higher density

SITRANS LVL100 - Operating Instructions