Siemens dishwasher Manuale di istruzioni per l'uso - Pagina 20

Stampa la pagina

Siemens dishwasher Manuale di istruzioni per l'uso

... when the appliance is

switched on

The appliance does not start.

– The mains fuse has tripped.

– The appliance plug has not been

inserted.

– The appliance door has not been shut

properly.

... on the appliance

Lower spray arm rotates sluggishly.

– Spray arm blocked.

The door is difficult to open. *

– Child-proof lock is activated. The

deactivation instructions are at the

back in the envelope.

* depending on model

Door cannot be closed.

– Door lock has been activated. To reset,

close the door with greater force.

Cover on the detergent dispenser cannot

be closed.

– Detergent dispenser overfilled or

mechanism blocked by sticky

detergent residue.

Detergent residue in the detergent

dispenser.

– Dispenser was damp when filled.

"Check water supply" display )2 lights

up.

– Tap turned off.

– Water supply interrupted.

– Supply hose kinked.

– Filter in the water supply blocked.

– Switch off the appliance and pull

out the mains plug.

– Turn off the tap.

– Clean filter in the supply hose.

– Reconnect power supply.

– Turn on the tap.

– Switch on the appliance.

– Water is left in the appliance at the end

of the programme.

– Waste water hose

is blocked or kinked.

– Waste water pump blocked,

cover on the waste water pump

is not locked in position

(see Waste water pump).

– Filters blocked.

– The programme has not yet ended.

Wait until programme

ends or implement "Reset"

function.

The "Check water supply" display )2

flashes rapidly.

– Water in the safety system.

– Switch off the appliance and pull

out the mains plug.

– Turn off the tap.

– Call customer service.

Refill indicator for salt )* and/or rinse-

aid )" is not lit.

– Refill indicator/s switched off.

– Adequate salt/rinse-aid available.

Refill indicator for special salt )* is lit.

– No salt.

Refill with special salt.

– Sensor does not detect salt tablets.

Use different special salt.

... during the wash cycle

Unusual foam formation.

– Handwash liquid in the rinse aid

dispenser.

Spilled rinse aid causes excessive

frothing, therefore please remove with

a cloth.

Appliance stops during the wash cycle.

– Power supply interrupted.

– Water supply interrupted.

Filling valves making striking noises

– Caused by the installation of the water

line and has no effect on the function

of the machine. Remedial action is not

possible.

Knocking/rattling noise during rinsing

– Spray arm is striking utensils.

– Utensils not arranged correctly.