Siemens SF 25M855 Manuale di istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavastoviglie Siemens SF 25M855. Siemens SF 25M855 28.

Stampa la pagina

Special salt $

Using special salt

Always refill with special salt immediately

before switching on the appliance. This

ensures that overrun special salt solution

is immediately washed out and does not

corrode the rinsing tank.

– Open the screw-type

cap of the compartment 1B.

– Fill the tank with water (only required

when switching on the appliance

for the first time).

– Then add salt (not table salt).

The water is displaced and runs out.

* depending on model

The salt refill indicator P on the fascia

is lit. It goes out as soon as a sufficiently

high salt solution has formed.

If the set value

is displayed, do not add

any salt because salt will not be used

during operation of the appliance, the salt

display is switched off. If the set values

are displayed, salt must be added.

Using detergents with salt

component

If combined detergents with a salt

component are used, salt can usually be

omitted up to a water hardness of 21° dH

(37° fH, 26° Clarke, 3.7 mmol/l). If the

water hardness is over 21° dH, special

salt must be used.

Salt refill indicator

As soon as the salt refill indicator

P on the fascia is lit, top up the salt.

Depending on the washing frequency

and the hardness setting, the regeneration

salt may not have to be topped up

for several months.

If the salt refill indicator P is impaired

(e. g. when using combined detergents

containing salt component), it can be

switched off.

– Proceed as described under "Setting

water softening system" and set

the value to .

The water softening system and salt

refill indicator are now switched off.

ã=

Warnings

– Never fill the salt dispenser with

detergent. You will destroy the water

softening system.

– To prevent corrosion, always refill with

salt immediately before switching on

the appliance.