Siemens ED8 FS11E Series Manuale di istruzioni - Pagina 28

Sfoglia online o scarica il pdf Manuale di istruzioni per Piano cottura Siemens ED8 FS11E Series. Siemens ED8 FS11E Series 36. Induction hob with integrated ventilation system

Stampa la pagina
Cleaning
en
Empty the container if necessary.
4.
Clean the metal grease filter and the container in the
5.
dishwasher.
If required, take off the housing cover underneath
6.
the appliance and clean it.
Clean the parts and dry them before refitting them.
7.
Inserting the metal grease filters
Insert the container.
1.
Insert the metal grease filter.
2.
Ensure that the metal grease filter has been
Note:
inserted correctly. Otherwise, the ventilation system
does not work.
Put the filter cover on.
3.
Resetting the saturation displays
Once you have cleaned or replaced the relevant filters,
reset the saturation indicator so that the
indicators go out.
"‚‚
After the appliance has been switched off,
lights up.
Touch the
symbol.
I
1.
A signal tone will sound. The metal grease filter
saturation indicator has now been reset.
If
is lit, touch the
"‚‚
2.
A signal tone will sound. The activated charcoal filter
saturation indicator has now been reset.
28
and
"‚ ‹
or
"‚‹
symbol again.
I

Cleaning the overflow container

Notes
Make sure that the supply to the overflow container
■
is not blocked. Remove any objects that have
entered the appliance once it has cooled down. To
do this, take the filter cover off and take the metal
grease filter and the container out.
Any liquid entering the appliance from above will be
■
collected in the overflow container. Unscrew the
overflow container and empty it. Take the housing
cover off if necessary.
Unscrew the overflow container with both hands.
1.
Notes
– Hold the overflow container level to prevent liquid
from leaking out.
– If the metal grease filter and the container have
been removed and liquid finds its way into the
appliance through the fan grille, you will need to
remove the housing cover.
"‚‚
Empty the overflow container, as well as the housing
2.
cover if necessary, and rinse it/them out.
Clean the overflow container before screwing it back
3.
into place.
Refit the housing cover.
4.