Siemens EH8..FM Series Manuale di istruzioni - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per Piano cottura Siemens EH8..FM Series. Siemens EH8..FM Series 21.
Anche per Siemens EH8..FM Series: Manuale di istruzioni (16 pagine)
Stampa la pagina
Deep-frying function
This function is used for frying on the two side hotplates on the
right-hand side, regulating the temperature of the pan.
Deep-frying features
The hotplate only heats when necessary. This way energy is
saved. The oil and fat do not overheat.
Notes
Never leave oil or fat cooking unattended.
■
Place the pan at the centre of the hotplate. Ensure that the
■
base of the pan is the right diameter.
Do not cover the pan with a lid. Doing so will cause the
■
automatic regulation not to function. A protective screen may
be used without affecting the automatic regulation
Temperature settings
Power level
Temperature
high
max
medium-high
med
medium-low
low
low
min
How to program
Select the correct temperature setting from the table. Place the
pan on the hotplate.
The hob must be switched on.
Press the
symbol. The
~
1.
display.
Suitable for
e.g., potato pancakes, sautéed potatoes, and rare beefsteak.
e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables
e.g. thick fried food such as hamburgers and sausages, fish.
e.g. omelettes, using butter, olive oil or margarine
indicator lights up on the hotplate
'
Only use oil which is suitable for frying. If using butter,
■
margarine, olive oil or pork lard, select the min temperature
setting.
Pans to use with the frying function
There are pans suited to this function which may be purchased
later as optional accessories, in specialised stores, or through
our Technical Assistance Service. Always indicate the related
reference code.
HZ390210 small pan (15 cm in diameter).
■
HZ390220 medium pan (19 cm)
■
HZ390230 large pan (21 cm)
■
The pans are non-stick. Food may also be fried in a small
amount of oil.
The temperature settings shown below have been specially
adjusted for these types of pans.
Note: If a different type of pan is used, try it first at the lowest
temperature, adjusting it as required. The pans may overheat.
Within the next 10 seconds, select the desired temperature
2.
setting in the programming zone.
The frying function will have been activated. The
temperature symbol stays switched on until the frying
temperature is reached. A signal then sounds and the
temperature symbol turns off.
Note: To display the temperature indicators
temperature setting, the hotplate must be selected.
After reaching the temperature setting, add oil to the pan and
3.
then the ingredients.
Turn the food over to avoid burning.
Turning off the deep-frying function
Select the hotplate and press the
pan.
p
p
and
symbol. Then remove the
~
9