Cisco 7961 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco 7961. Cisco 7961 18. Multi-line ip phones
Anche per Cisco 7961: Manuale d'uso (19 pagine), Manuale d'uso (6 pagine), Manuale d'uso (6 pagine), Manuale d'uso (14 pagine), Manuale d'uso (6 pagine), Manuale di avvio rapido (6 pagine), Manuale d'uso (17 pagine), Manuale di riferimento rapido (2 pagine), Manuale di riferimento rapido (2 pagine), Manuale di avvio rapido (21 pagine), Manuale d'uso (4 pagine), Manuale di riferimento rapido (4 pagine), Impostazione (11 pagine), Manuale di riferimento rapido (1 pagine), Manuale d'uso (2 pagine), Manuale d'uso (2 pagine), Manuale d'uso (2 pagine), Manuale operativo (3 pagine), Lettera (2 pagine), Manuale di riferimento (3 pagine), Manuale d'uso di riferimento rapido (2 pagine), Manuale di avvio rapido (2 pagine)

Transfer a Call

1. To transfer an active call, press the Softkey located directly below Transf. on the

LCD screen.

2. Dial the number to which the call is to be transferred.

3. Once the line begins to ring, push the Transf. key again or wait until the party

answers, announce the call, and then press the Transf. key.

4. Hang up to end involvement in the call.

• Note: If you need to cancel your transfer (such as the person you are transferring

the call to does not answer), press the End Call softkey to end that call and then

press Resume to return to your original call.

1. Press the Transfer Softkey.

2. Dial ** and then the 5 digit phone number. Ex: **33333

3. Press the Transfer Softkey again to complete the transfer.

1. Place the initial call.

2. Press the Softkey located directly below the word more until Confrn is visible.

The caller is automatically on hold and a new line is opened.

3. Dial the new party.

4. After the call is answered, press the Confrn Softkey again. This will add the

second party to the call.

5. Repeat steps 2-4 to access more participants to the conference call. (NOTE:

when the initiator of the conference call disconnects, the call is terminated. If the

hold button is

1. used by the initiator, the other parties cannot talk to each other. Use the Mute

button in order to avoid disrupting other callers.

Note: You may add up to 7 to your conference call for a total of 8 conferees.

Dropping the last caller from a conference call

While on a conference call the user can drop the last person who had been

added to the conference call.

1. Press the More Softkey.

2. Choose RmLstC (remove last caller) Softkey. The last person is dropped from

the call.

Martinez Unified School District

Phone and Voicemail Users Guide for Cisco 7961 Phones