Cisco 7961G-GE - IP Phone VoIP Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco 7961G-GE - IP Phone VoIP. Cisco 7961G-GE - IP Phone VoIP 4. Unified communications manager 9.0 (sccp and sip)
Anche per Cisco 7961G-GE - IP Phone VoIP: Scheda tecnica (8 pagine), Manuale d'uso (13 pagine), Manuale di amministrazione (12 pagine), Manuale d'uso (13 pagine), Manuale d'uso (13 pagine), Manuale (12 pagine), Manuale d'uso (6 pagine), Manuale di amministrazione (16 pagine), Risoluzione dei problemi e manutenzione (27 pagine)

Handset, Headset, and Speakerphone

Step 5

Press Save or press Cancel.

Wireless Headset

Cisco Unified IP Phones 7962G and 7942G support wireless headsets. Refer to the wireless headset

documentation for information about using the wireless headset's remote features. Also, check with your

system administrator to be sure your phone is enabled to use a wireless headset with the wireless headset

remote hookswitch control feature.

If you use a headset that supports wideband, you may experience improved audio sensitivity if you enable

the wideband setting on your phone (this setting is disabled by default). To access the setting, choose

> User Preferences > Audio Preferences > Wideband Headset.

If the Wideband Headset setting is dimmed, then you cannot control this setting.

Check with your system administrator to be sure your phone system is configured to use wideband. If the

system is not configured for wideband, you may not detect any additional audio sensitivity even when using

a wideband headset. To learn more about your headset, refer to the headset documentation or contact your

system administrator for assistance.

Speakerphone

If the handset is in its cradle and

call will trigger speakerphone mode automatically.

If you want to...

Toggle speakerphone mode on or off

Switch to a handset

Adjust the volume level for a call

When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your

system administrator configures AutoAnswer to use either the speakerphone or a headset. You may use

AutoAnswer if you receive a high volume of incoming calls.

is not lit, many of the actions you can take to dial a number or answer a

Then...

Press

Lift the handset.

Press

Press Save to preserve the volume level for future calls.

Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified

during a call or after invoking a dial tone.

Communications Manager 9.0 (SCCP and SIP)

Wireless Headset