Digital Juice DJ7HD Manuale introduttivo - Pagina 3

Sfoglia online o scarica il pdf Manuale introduttivo per Monitor Digital Juice DJ7HD. Digital Juice DJ7HD 3. 7-inch lcd field monitor

Stampa la pagina

Getting Started Guide

Menu Functions

Before setting any menu functions, please make sure the device is

connected correctly and receiving power. The monitor must be powered

ON and receiving a signal before you can use the onscreen display (OSD)

menu functions. Press the MODE button on the front of the unit to switch

the display to your active signal source (HDMI/YPbPr/VIDEO). You can then

press the MENU button to access the OSD. Use the up and down arrow

keys to choose from COLOR, MENU, FUNCTION or SOUND menu options

in main menu. Press the left or right arrow keys to confirm your selection

and then choose your desired adjustment option by pressing the up or down

arrow keys. Next, use the left or right arrow keys to adjust the value or

select an adjustment option. Press the MENU key to exit.

1. Color Menu Settings

Brightness:

To adjust the image's brightness

Contrast:

To adjust the brightest to darkest ratio of the image

Tint:

In composite video mode, this is used to adjust the NTSC color signal

Saturation:

To adjust the color saturation in the image

Color Temp:

Use this adjustment to alter the color temperature of the image

to one of the following presets: User, 6500K, 7500K, 9300K. If User preset is

selected, use the up and down arrow keys to select Red (R), Green (G) or B

(Blue) and then adjust the value to your requirements using the left and right

arrow keys.

2. OSD Menu Settings

Language:

Choose from English, German, Korean, Spanish, Italian, French,

Japanese, Chinese, Korean, Russian

H Position:

To adjust the OSD position horizontally

V Position:

To adjust the OSD position vertically

OSD Timeout:

This timer setting controls the amount of time the menu pop-up

screen will stay on screen without any user input before disappearing

Transparent:

To adjust transparency of the Menu

(continued)

3. Function Menu Settings

Reset:

Resets system parameters and settings to original factory settings

Display Ratio:

To choose the aspect ratio - 16:9 or 4:3

Finder Frame:

Picture framing marker options including 80%, 85%, 90%,

93%, 96% & OFF

LR:

To flip image left to right (horizontally)

UD:

To flip image up and down (vertically)

4. Sound Menu

Volume:

To adjust the

volume

Troubleshooting

For any problems using the unit, first consult these troubleshooting tips.

Problem #1: Picture is appearing only in black and white

Possible Solution #1: Please check saturation, brightness, and contrast

adjustments to make sure they are set properly. Also make sure the Color

setting in the Function menu is set to full color saturation and try again.

Problem #2: There is NO picture after turning on the power.

Possible Solution #2: Check the input signal cable connection and make sure

the battery or AC power connections are seated properly on the back of the

monitor and then try again.

Problem #3: Image color is distorted or abnormal, eg. lacking in some color

Possible Solution #3: Please check the input signal cable connection to

make sure it is correct. If the cable is damaged or loose, it can cause poor

signal transfer, resulting in image color distortion.

Problem #4: The unit will not power on when using battery power source.

Possible Solution #4: The battery needs to be charged or is bad. Please

change the battery and try again.

Problem #5: Any other abnormal image display

Possible Solution #5: Please try entering the OSD Function Menu and

selecting "reset" to return all system parameters and settings to original

factory settings.