Epson dreamio EMP-TW600 Manuale operativo - Pagina 13
Sfoglia online o scarica il pdf Manuale operativo per Proiettore Epson dreamio EMP-TW600. Epson dreamio EMP-TW600 36. Esc/vp21 command user's guide for home projectors
Anche per Epson dreamio EMP-TW600: Opuscolo e specifiche (4 pagine), Manuale d'uso (9 pagine)
Stampa la pagina
Registering and deleting projectors for monitoring
Registration by specifying an IP address (Manual
registration)
PROCEDURE
1
Right-click in "Grouping view" and select "New" -
"Projector (manual registration)".
The following window will be displayed.
• If "Detail list view" is displayed, select "New" - "Projector (manual
registration)" from the "Edit" menu.
TIP
You can also carry out this operation by selecting "Projector (manual
registration)" from "New" in the "Edit" menu.
2
Enter the IP address of the projector to be registered
in the "IP address" box and then click [Search]. When
the message is displayed, click [OK].
• If using a serial ⇔ TCP/IP conversion adapter and cable to connect
the projector, select "Use Serial ⇔ TCP/IP conversion adaptor".
Enter the port number in "Port Number" and then click [Search].
3
After searching is complete, enter the information for
the projector to be registered while referring to the
table below.
Display name Enter the name of the projector(s) to be displayed in
"Grouping view" or "Detail list view".
Up to a maximum of 32 bytes can be entered.
A space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in "Grouping view"
or "Detail list view".
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s"Registering several projectors to a
monitoring group all at once"
Projector
This shows the name that has been registered on the
name
projector.
IP address
This shows the IP address that you entered in step 2.
Use Serial ⇔
Select this if using a serial ⇔ TCP/IP conversion
TCP/IP
adapter to connect the projector.
conversion
adaptor.
If using a serial ⇔ TCP/IP conversion adapter to
Port Number
connect the projector, enter the port number.
12
p.13