Cisco 8000 Series Preparare l'installazione - Pagina 2
Sfoglia online o scarica il pdf Preparare l'installazione per Telefono IP Cisco 8000 Series. Cisco 8000 Series 10. Ip phones with multiplatform firmware
Anche per Cisco 8000 Series: Manuale di installazione (39 pagine)
Stampa la pagina
Compliance and Safety Information
• Keep the work area clear, smoke and dust-free during and after installation. Do not allow dirt or debris
• Do not wear loose clothing, jewelry, or other items that could get caught in the router or other associated
• Cisco equipment operates safely when used in accordance with its specifications and product-usage
• Be sure to power down a fixed configuration PDU or modular configuration power shelf before removing
• If potentially hazardous conditions exist, do not work alone.
• Take care when connecting multiple units to the supply circuit so that wiring is not overloaded.
• This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
• When installing or replacing the unit, the ground connection must always be made first and disconnected
• To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
• Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
• The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide
Compliance and Safety Information
The Cisco 8000 Series Routers are designed to meet the regulatory compliance and safety approval requirements.
For detailed safety information, see Regulatory Compliance and Safety Information Cisco 8000 Series
Routers.
Laser Safety
Warning
Statement 1051 Laser Radiation
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or
view directly with optical instruments.
Prepare for Installation
2
to enter into any laser-based components.
components.
instructions.
it from the chassis.
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain about whether suitable grounding is available.
last.
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit.
servicing.
out the unit for servicing. Failure to stabilize the rack may cause the rack to tip over.
Prepare for Installation