Cisco 8821 Manuale degli accessori - Pagina 16

Sfoglia online o scarica il pdf Manuale degli accessori per Telefono IP Cisco 8821. Cisco 8821 30. Wireless ip phone
Anche per Cisco 8821: Impostazione (16 pagine), Risoluzione dei problemi (5 pagine), Manuale per l'utente finale (6 pagine), Manuale di avvio rapido (2 pagine)

Set Up the Multicharger

Do not use chargers in a Potentially Explosive Atmosphere.

Caution

Do not charge the phone if it is wet.

Set Up the Multicharger

The power jack is on the right side of the multicharger.

Procedure

Step 1

Plug the jack end of the power cord into the multicharger.

Step 2

Plug the other end of the power cord into the power adapter.

Step 3

Plug the power adapter into the electrical outlet.

Step 4

Place the multicharger on a stable work surface.

The wall mount kit comes with the following components:

• bracket

• package with 5 screws and 5 self-tapping wall anchors

Before You Begin

You need the following tools:

• Drill and a 0.25 inch drill bit

• Pencil

• Level

• Philips #1 and #2 screwdrivers

You need the power cable and power adapter.

Procedure

Step 1

Determine the location for the bracket. The bottom right corner of the bracket must be less than 50 inches

(127 cm) from an electrical outlet.

Step 2

Mount the wall bracket.

Cisco Wireless IP Phone 882x Series Accessory Guide

Cisco Accessories