Cisco 8832 Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco 8832. Cisco 8832 30. Masergy ip conference phone
Anche per Cisco 8832: Manuale principale della migrazione del firmware (31 pagine), Manuale d'uso (20 pagine), Manuale di avvio rapido (2 pagine), Manuale di installazione (39 pagine), Manuale di avvio rapido (16 pagine), Manuale di manutenzione (9 pagine), Avvio rapido (2 pagine), Impostazioni (14 pagine), Manuale di avvio rapido (2 pagine), Manuale di riconfigurazione (2 pagine), Avvio rapido (2 pagine), Manuale (30 pagine)

Your Phone

Install the Wireless Expansion Microphones

The conference phone provides the option of connecting two wireless expansion microphones.

Note

You must use either two wired microphones or two wireless microphones with the phone, but not a mixed

combination.

When the phone is in a call, the LED on the expansion microphone is lit green. To mute the expansion

microphone, press the Mute key. When the microphone is muted, the LED is lit red. When the battery in the

microphone is low, the battery indication LED blinks rapidly.

Before you begin

Disconnect the wired expansion microphones before you install wireless expansion microphones. You cannot

use both wired and wireless expansion microphones at the same time.

Procedure

Step 1

Position the table mount plate on the table surface location where you want to place the microphone.

Step 2

Remove the adhesive for the double-stick tape on the bottom of the table mount plate. Place the table mount

plate to adhere to the table surface.

Step 3

Attach the microphone to the table mount plate. Magnets are embedded in the microphone to snap the unit

into place.

You can move the microphone and attached table mount to a different location on the table surface as needed.

Use care when moving to protect the unit.